Bearded Dragon Enclosure Setup: Temperature, UVB, and Everything Else
On This Page▾

A bearded dragon needs more room, stronger UVB and a steeper temperature gradient than a lot of old care sheets still say. A 4x2x2 ft enclosure, a T5 HO tube and a measured basking surface are now the standard.
Enclosure Size
4x2x2 ft (roughly 120 gallons) is the adult minimum, not an upgrade you'll get around to eventually. Bigger is better if you have the room. A front-opening enclosure makes daily handling and cleaning much easier than a top-opening one.
Temperature Gradient
Set up a clear warm side and cool side, and check both with an infrared thermometer aimed at the surface itself.
| Zone | Target Temperature |
|---|---|
| Basking surface (adults) | 95 to 110°F |
| Basking surface (juveniles) | 105 to 115°F |
| Warm side (ambient air) | ~90°F |
| Cool side | 75 to 85°F |
| Nighttime | 65 to 75°F |
UVB and heat are two separate jobs, and mixing them up is one of the most common setup mistakes. A T5 HO UVB tube supplies the UV your dragon needs but produces little to no usable heat on its own. It will not get the basking spot to temperature by itself. Pair it with a separate basking bulb (halogen or incandescent) positioned over the same basking platform, and confirm the surface temperature with an infrared thermometer, since the wattage on the box won't tell you. Run the basking bulb through a dimming thermostat with its probe at the basking surface, so the bulb cannot overheat the slab or start a fire.
Only add supplemental heat overnight if your room regularly falls below about 65°F, and use a ceramic heat emitter, which gives heat without light, so it doesn't disrupt sleep.
UVB Is Not Optional
This is the one piece of equipment worth spending real money on. Bearded dragons need strong UVB, specifically a linear T5 HO tube (ReptiSun 10.0, or Arcadia's 12% Desert or 14% Dragon, are commonly recommended), spanning about two-thirds of the enclosure length.
Target a UVI gradient from 0 up to 4.0 to 4.5 at the basking spot, the Ferguson Zone 3 to 4 range for an open basker, measured with a Solarmeter 6.5R if you want to be precise about it. If you keep a hypomelanistic, silkback, or translucent morph, dial this back to a UVI of 3.0 or lower: those morphs are more UVB-sensitive and can be burned by standard output.
For a 12% tube in its reflector, mount the fixture about 18 inches above the basking surface with nothing in between, or about 15 to 16 inches when it shines through a standard mesh lid, nearer 13 under a heavy screen. Never mount it behind glass or plastic: both block UVB almost entirely. A 14% tube sits farther, about 20 to 22 inches with no mesh. Tubes rated 10 to 14% UVB are each mounted to their own maker's distance chart, then the height is confirmed with a UVI meter at the basking spot. Run it 10 to 14 hours a day, and replace the tube every 6 to 12 months, following the maker's own schedule. A T5 HO tube is the preferred lamp, and the same 6 to 12 months applies to a T8 or a mercury vapor bulb. UVB output drops off well before the bulb visibly dims, so replace it on the calendar, even when it still looks bright.
Measure from the tube to the highest point the dragon can reach, not just the basking slab. Every perch, branch and hide top must sit at or below the chart's distance from the tube, or the dragon can climb into too much UVB.
A bright daylight LED around 6500K alongside the UVB helps with activity and appetite. Without UVB a dragon cannot make vitamin D3 or use the calcium it eats, which is how metabolic bone disease starts.
UVI, or UV Index, is the same measurement scale used to describe how strong sunlight is outdoors. Field measurements put the highest UV index wild bearded dragons are found basking in at about 3 to 9.5, so a basking spot at 4.0 to 4.5 sits inside the range the species chooses for itself.
Source: Baines et al. 2016, Journal of Zoo and Aquarium Research
Humidity
Keep it low, 30 to 40%. Bearded dragons are an arid species, and excess humidity is a direct path to respiratory and skin infections. A basic hygrometer is worth the few dollars it costs.
Substrate
Paper towel, newspaper, or tile are the safest options, especially for anyone new to keeping dragons. Avoid loose sand, including calcium sand, along with wood chips and gravel, all of which carry a real impaction risk if ingested.
Experienced keepers sometimes go the other direction and run a bioactive substrate, a deep naturalistic mix with live plants and a cleanup crew of isopods and springtails that processes waste for you. It's a bigger commitment than paper towel and it isn't where most people should start, though a bioactive build keeps the same lighting and heat, so only the floor changes.
Furnishings
- A basking platform of light-colored stone, slate, or sturdy wood directly under the lamp, with the heat covering an area at least as big as the dragon's whole body, tail included
- At least two hides, one on the warm side, one on the cool side
- Sturdy, well-anchored climbing branches
- A large, shallow water dish in the cool end, changed daily
Cover three sides of the enclosure to cut down on reflections, which can stress a dragon that mistakes its own reflection for a rival. Skip hot rocks entirely: they're a common cause of thermal burns.
Get the Heat and the Light Right First
A bearded dragon's enclosure comes down to two readings: a basking surface in range under its own bulb, and a UVB tube at the right distance, replaced on schedule. The 4x2x2 ft space, the low humidity and a floor it cannot swallow sit around those two. Measure both with the right tools instead of trusting the box the bulb came in.
Sources & Further Reading
Last reviewed 18 Aug 2026 · 6 sources
- ReptiFiles: Bearded Dragon Temperatures & UVB Requirements
- UC Davis School of Veterinary Medicine: Bearded Dragon Care
- VCA Animal Hospitals: Feeding Bearded Dragons; Bearded Dragon Housing
- NC State College of Veterinary Medicine: Bearded Dragon Care
- RSPCA: How to care for your bearded dragon
- Arcadia Reptile: Arcadia Brochure 2026, UVI outputs (p. 37), D3+ Dragon 14% and D3+ Desert 12% ProT5 kits; UV through a mesh lid

The Bearded Dragon Care Package carries this setup as a checklist with the targets to hit, in a 85-page PDF you can keep by the enclosure, $8.99. Includes the Universal Pet Kit free: a routine chart and equipment log you can fill in.
Frequently Asked Questions
What size enclosure does an adult bearded dragon need?
4x2x2 ft, about 120 gallons, and that is the adult minimum, not an upgrade for later. Bigger is better if you have the room.
How hot does the basking spot need to be?
95 to 110°F on the basking surface for adults, and 105 to 115°F for juveniles, measured with an infrared thermometer aimed at the surface itself. A separate basking bulb supplies that heat; the UVB tube gives UV and little usable heat on its own.
Do bearded dragons need UVB?
Yes, and it's the one piece of equipment worth spending real money on. They need a linear T5 HO tube spanning about two-thirds of the enclosure; a 12% tube mounts about 18 inches above the basking surface, or about 15 to 16 inches through a standard mesh lid (nearer 13 under a heavy one), and never behind glass or plastic, which block UVB almost entirely.
What substrate is safest for a bearded dragon?
Paper towel, newspaper, or tile, especially for a first dragon. Loose sand, calcium sand included, wood chips, and gravel all carry an impaction risk if swallowed.
More on the Bearded Dragon














Recommended Gear
As an Amazon Associate I earn from qualifying purchases through the links above, at no extra cost to you.
Written by Michael Ryan
Written from Mike’s own two dragons, Dex and Cera.
Mike keeps two rescued bearded dragons, Dex and Cera, and writes the care guides on BeastlyFacts from his own research and mistakes. He is not a veterinarian.
More about Michael Ryan →












